Black Slate Fireplace Facing Sets

Home
Fireplace Surround Facings
Black Cleft Slate Facing

Black Cleft Slate Facing

Black Cleft Slate has 1/2" nominal thickness. Contact us for a quote for any sets including an oversized piece. To price a standard set with or without cuts, make selections in the drop down menus (below.) If the length dimension of the Header needs to be reduced, enter the new dimension as dimension A. If the Legs need to be shortened, enter the new Leg Height as dimension B. If you need a Riser, make that selection and if it needs to be cut, enter the new Riser dimensions in the boxes for C and D. And finally, if the Hearth needs to be cut down, make the proper selection and enter new Hearth dimensions for E an F. Note: If you do not supply new dimensions, the facing will ship its standard size... (NOTE: there is no edge polishing on slate and you shouldn't enter dimensions larger than our standard dimensions.)

Price:

$338.00

Availability:

Normally Ships in 4-6 Days

Shipping:

Free Shipping

* System Size:

* Header Length:

* Header Length "A" (inches):

* Leg Height:

* Leg Height "B" (inches):

* Optional Riser:

* Optional Riser Cuts:

* Riser Length "C" (inches):

* Riser Height "D" (inches):

* Hearth Cuts/Polishing:

* Hearth Depth "E" (inches):

* Hearth Length "F" (inches):

Quantity:

Product Description

Standard Dimensions
(Cleft/sheared slate has 1/2" nominal thickness*)

Size 1 (Large) Facing Systems (with 72" Hearths for most 42 to 44" Wide Fireplaces)
Hearth 20 x 72
Legs 8 x 36
Header 12 x 60

Size 2 (Small) Facing Systems (with 66" Hearths for most 36 to 43" wide fireplaces)
Hearth 20 x 66
Legs 6 x 36
Header 8 x 58

Optional Riser = 6 x 42

Choose one of our full size Black Cleft Slate Facing set (nominal thickness is 1/2") for a professional designer look for your fireplace; an affordable alternative to inexpensive tile surrounds. Slate is a timeless option, and in the black color, it goes with any decor theme. Typical of black slate, ours has a medium charcoal grey coloring that will darken if you seal it. Some owners rub linseed oil into it once or twice a year for a darker finish.

*All our slates are cleft, meaning they are "sheared" rather than cut and polished like marble or granite facings kits. Part of the beauty of slate is the natural variation in textures and thicknesses, adding character to to your installation. There is some texture to it that can be seen and felt with your fingertips.
For modest fees we will custom cut the the components of our facing kits, and we can quote larger sizes, as well. Phone or use the contact us form (above) to provide us the sizes of each component that you need, and we'll see if we can accommodate you. Note: oversized slate sets are closer to 3/4" thick.

Tips on How To Clean Slate!

Remember that slate is a stone with a porous surface; liquids are easily absorbed. Water will normally make the stone appear darker, but after 15 to 20 minutes of drying time, the original color should come back, but wipe any excess to prevent rings or calcium staining. Mild soap and water (a few drops, only, of a clear-colored dish washing liquid) will clean most dirt and/or dust. Use a very diluted ammonia and water solution (1 : 20) on tough stains with a soft cloth or sponge. Do not use citrus-base products, vinegar or anything abrasive. You can apply a slate sealant (ask at your local hardware, home center, or stone fabrication shop.)

Feel free to call us at (866) 983-3267 M-F. Note: If you need components that are larger than our standard sizes you will need to contact us for a custom facing quote.