Wainscoting Plank Kit WK-29 | 34" to 38" Tall

 Click here to see Component Parts Illustration
  Qty 29 Planks @ 3  3/8" x 29" x 5/16"
  Exposed Plank = 3 1/4"  x  28 1/2"
  Base Molding Height = 5"H x 7' 6"
  Large Chair Rail = 3"H
  Small Chair Rail Height = 3/4"H
  Plate Shelf = 4 3/4"H x 3"D

Our shortest Tongue and Groove Wainscot Planking Kit will add stylish beauty to any room with very little work!  Each WK29 DIY Kit contains 29 individual 3 3/8" wide x 29" tall tongue and groove planks, baseboard molding and the 'ready to install' top rail molding of your choice to create a 7' 6" linear length. The overall height of the kit is dependent upon which top rail you choose and how much of the planking length you cut off on site, if any. Select a Small Chair Rail, Large Chair Rail, or Plate Shelf for use as the top rail as you get prices or make a purchase below.   The planks are finished with a 1 1/2" repeat bead board pattern on one side, and a flat panel with V-groove edges on the reverse side.  You select the side you want to use (either bead board or flat panel styling).  The planks fit into a 1/4" factory cut recess in the baseboard as well at the bottom of the top rail.

The kits include a simple V-groove (beveled) plank design on one side and a bead board wainscoting design on the reverse side (beads 1 5/8" on center); you choose which side to be finished and which side to use!

Use tongue and groove planking throughout your home as a unifying element. If you choose an unfinished paint grade, we recommend a semi-gloss paint for durability, and remember, our wainscot planking complements any style, whether modern, traditional, or anything in between!

Don't forget to order optional inside and/or outside corner trims or shoe moldings. How to Install Classic Tongue and Groove Paneling.

Feel free to phone in your order. Call (866) 983-3267 M-F.